


CLGE40
Save $109.80 on this order paying by wire
All-in-one salt chlorinator for pools to 40,000 gallons that needs one pipe cut, not two.
All-in-one salt chlorinator for pools to 40,000 gallons that needs one pipe cut, not two.
This is a one-cut install into the return line, so decide where the unit sits before you cut anything — the control head and cell are one body and cannot be separated. Check your pool is at or under 40,000 gallons. If you run a variable speed pump, this is the model in the range designed for it. Expect reduced output in cold water by design: cold-water mode below 68°F and 25% maximum output below 59°F.
| Maximum Pool Volume | 40,000 gallons |
|---|---|
| Chlorine Output | 1.4 lb per 24 hours (27.07 g/hr) |
| Cell Type | Replaceable electrolysis cartridge in a clear housing |
|---|---|
| Cell Life | 8,000 operating hours before the CELL LIFE LOW indicator |
| Sensors | Bi-directional flow sensor, temperature sensor, salinity sensor |
| Operation | Four-button control, LED display, 24-hour super chlorination mode |
|---|---|
| Pump Compatibility | Designed to work with variable speed pumps |
| Salt Range | 500–6,000 ppm |
|---|---|
| Cold Water Behaviour | Cold-water mode below 68°F; maximum output reduced to 25% below 59°F |
| Supply | 110V or 220V automatic |
|---|
| Unit Weight | 15.5 lb |
|---|
| Manufacturer Warranty | 3 years limited |
|---|