In-Pool Chaise Lounges

The in-pool chaise is the piece that started the category. It lets you lie back at full length with a few inches of water running over the frame, so you get the cooling effect of being in the pool without floating away from your drink. Every chaise here is molded from UV stabilized, marine grade resin rated for continuous submersion in chlorinated and salt water.

Standard depth or deep

The Signature Chaise is sized for typical tanning ledges of roughly 3 to 9 inches of water. The Signature Chaise Deep uses a taller frame for ledges closer to 9 to 12 inches, keeping the seating surface at the right height so you are not sitting underwater. The Autograph Chaise offers the same in-water performance with a more contemporary line.

Get the depth right

Measure from the ledge floor to the waterline at your normal operating level, not at the top of the tile. Ordering a standard chaise for a deep ledge is the most common mistake we see, and it is the one thing that cannot be fixed with an accessory. If you are between sizes, a riser can lift a standard chaise slightly, and our team is happy to check your measurement before you order.

Finish the setup with a headrest pillow, a full cushion, a clip in seat shade for midday sun, and a SafeGuard pad if you have an aggressive pebble or quartz finish.