Your Cart is Empty
Rola-Chem Pro Series 301 Peristaltic Chemical Metering Pump — 0.9 GPD
543807
$459.95
Save $22.99 on this order paying by wire
ㅤ
Key Specs
−Dealer-direct Rola-Chem. Chemical touches the tube, never the pump.
Max Output
0.9 GPD
Voltage
120V or 240V
Pump Type
Peristaltic
Max Pressure
30 PSI
The Pro Series 301 is the small end of the range - 0.9 gallons a day, for spas, small commercial spas and any line that needs a trickle of chemical rather than a flow. It runs the same two-roller head and the same percentage timer as the rest of the family, so the parts and the service routine are identical to the bigger pumps. Because the chemical only ever touches the tube, there is no seal, no diaphragm and no valve for chlorine or acid to attack — you replace a pinch tube instead of rebuilding a pump head.
Features and benefits
- Peristaltic design — chemical contacts the tube only, never the pump internals
- Built-in percentage timer with 0.6 to 900 second feed cycles
- Up to 0.9 GPD output at 30 PSI
- Tool-free roller housing for fast pinch-tube changes
- Choice of 120V or 240V, cord or conduit entry
Who it's for
- Spa and small commercial spa operators
- Sites metering a low-volume additive into a water line
- Anyone replacing a small diaphragm feeder
What's in the box
- Pro Series 300 metering pump
- Pinch tube installed in the roller housing
- Suction and injection tubing
- Injection fitting and hose clamps
- Operating manual and wiring diagram
Before you order
Confirm the supply voltage at the pump location and whether your conduit or cord entry is required by local code. Check that your chemical is compatible with the tube material you order — clear Tygon for chlorine, black Tygon for acid. This pump is a metering device, not a transfer pump.
This product is offered in 4 configurations. Choose the power & connection that matches your installation before adding to cart — configuration is set at the factory.
Key Features
- Peristaltic design — chemical contacts the tube only, never the pump internals
- Built-in percentage timer with 0.6 to 900 second feed cycles
- Up to 0.9 GPD output at 30 PSI
- Tool-free roller housing for fast pinch-tube changes
- Choice of 120V or 240V, cord or conduit entry
Who It's For
- Spa and small commercial spa operators
- Sites metering a low-volume additive into a water line
- Anyone replacing a small diaphragm feeder
What's Included
- Pro Series 300 metering pump
- Pinch tube installed in the roller housing
- Suction and injection tubing
- Injection fitting and hose clamps
- Operating manual and wiring diagram
Specifications
| Max GPD | 0.9 |
|---|---|
| Voltage | 120V |
Performance
| Maximum Output | 0.9 GPD |
|---|---|
| Maximum Pressure | 30 PSI |
Drive
| Pump Type | Peristaltic, roller-driven pinch tube |
|---|
Control
| Feed Cycle | Percentage timer |
|---|