Your Cart is Empty
Solaxx SaltDip 2-in-1 Digital Salt Reader — MET30A
MET30A
$281.00
Save $14.05 on this order paying by wire
ㅤ
Key Specs
−A real salt number in ppm plus water temperature, with no calibration and no reagents.
Parameters
Salt and temperature
Salt Range
200–9,800 ppm
Calibration
None required
Warranty
90 days
A real salt number in ppm plus water temperature, with no calibration and no reagents.
- Reads salt from 200 to 9,800 ppm plus water temperature
- No calibration procedure to run — unlike the pH-capable SafeDip
- Removable sample cup so you can read a still sample rather than moving water
- Memory holds the previous reading for comparison
- Commercial-grade conductivity sensor with a protective electrode cover
What's included: SaltDip meter, Sample cup, Electrode cover.
Key Features
- Reads salt from 200 to 9,800 ppm plus water temperature
- No calibration procedure to run — unlike the pH-capable SafeDip
- Removable sample cup so you can read a still sample rather than moving water
- Memory holds the previous reading for comparison
- Commercial-grade conductivity sensor with a protective electrode cover
Who It's For
- Salt pool owners who need an accurate salt reading before adding a bag
- Owners whose chlorinator is showing a low-salt light and want to check it independently
What's Included
- SaltDip meter
- Sample cup
- Electrode cover
About the Brand
Measures
| Salt (NaCl) | 200–9,800 ppm, 100 ppm resolution, ±10% per the owner's manual |
|---|---|
| Temperature | 5–50°C / 41–122°F, selectable °C or °F |
Operation
| Calibration | None required |
|---|---|
| Battery | 2 × AAA — the owner's manual states batteries are not included |
| Water Resistance | The meter body is not water resistant; only the probe electrodes may get wet |
| Display | 42 × 34 mm LCD |
| Auto Power Off | After 1 minute idle |
Included
| Accessories | Removable sample cup, protective electrode cover |
|---|
Warranty
| Manufacturer Warranty | 90 days per solaxx.com and the owner's manual |
|---|