


MET20A
Save $20.45 on this order paying by wire
Reads pH, salt, TDS, ORP, temperature and chlorine range without strips or reagents.
Reads pH, salt, TDS, ORP, temperature and chlorine range without strips or reagents.
What's included: SafeDip meter, Sample cup, pH buffer packets, Probe protector.
| pH | 0.0–12.0 pH, ±0.1, one-point calibration |
|---|---|
| Salt | 200–8,000 ppm, ±5% or ±100 ppm |
| TDS | 200–8,000 ppm, ±5% or ±100 ppm |
| ORP | 150–999 mV, ±20 mV over 500–800 mV |
| Temperature | 5–50°C / 41–122°F, ±1°C |
| Free Chlorine | Lo / Good / Hi indication derived from ORP, not a ppm reading |
| Battery | 2 × AAA — the owner's manual states batteries are not included |
|---|---|
| Water Resistance | The meter body is not water resistant; only the probes may get wet |
| Calibration | One-point pH calibration using 7.00 pH buffer, two packets supplied |
| Auto Power Off | After 1 minute idle |
| Replacement pH Probe | MET20A-040 |
|---|---|
| pH Buffer Tablets | MET20A-062 |
| Manufacturer Warranty | 90 days per solaxx.com and the owner's manual |
|---|